Vintage Motorcycles

Vintage Motorcycles

Clive Brown rides with history

  • Feb. 5, 2020 7:30 a.m.

– Story by Maggie Jackson Photography by Don Denton

Clive Brown, owner of Pizzability on the West Shore, loves buying, restoring, fixing and riding vintage motorcycles. His garage and basement are filled with vintage bikes. The wall of his garage is lined with Iron Butt Association certificates, a few earned while riding his classic bikes. “You must complete a 1,000 mile (1,600 km) in 24 hours ride, fully documented with receipts etc. with a witness to sign the paperwork at the start and end of the ride, before you do any of the extreme rides” Clive explained. “I think I have about 40 certificates, including numerous extreme and theme rides.”

Clive has always loved vintage motorcycles. “When I was six, I found my grandfather’s Rudge in the garage. I was in awe of all the controls. It was so big and huge and screamed adventure. I wondered what my grandfather did on that motorcycle; where he went and what he saw.”

When he was eleven, Clive’s dream of owning a motorcycle came true. “My older cousin gave me a Triumph Tiger Cub that didn’t run. He told me I could have it if I could fix it. We brought it home and pushed it up and down the streets for a month trying to get it started. It finally started when it was my turn to “ride” it. It must have been a fuel issue, as carburetors get gummed up. Once we got it started, my mother told me it had to go!”

At 14, Clive and his family emigrated from England to Alberta. To Clive’s delight he discovered being 14 meant he could get a motorcycle licence. He bought a Honda CB 100, then a 1976 Suzuki GS750.

Clive’s love of classic bikes is entrenched into his life. “While I love super high-tech bikes, the appeal of the classics is that they aren’t high-tech. They have carburetors and points and if something happens to them I can fix them at the side of the road.”

While he has plenty of classic motorcycles to enjoy, there’s still one that he’d like to get. “My most desired motorcycle is a 1937 Rudge. It was prewar so it had a girder front end with a huge headlight. They’re so classic and unique in the way they were constructed and engineered. It had linked brakes which was unheard of until they were subsequently introduced in the Goldwing.”

Three classics Clive is particularly fond of are his: Jawa Perak, Chang Jiang and FZR250 Yamaha.

“The Jawa Perak has the best history,” Clive said. “The prototype was manufactured and 20,0000 km put on it during the Nazi occupation of Czechoslovakia during WWII. They weren’t allowed to work on anything that wasn’t related to the Nazi war effort. The Czechs, right under the noses of the Nazis, engineered this 250 cc dual exhaust port two stroke motorcycle. They got away with it by putting a fake SS licence plate on the back. When stopped, they told the guards it was a secret SS project. They named the bike Perak, which has two meanings: mythical super hero or a cell of freedom fighters. The motor is a work of art, very art deco to look at. Gearheads see it as a thing of beauty. The bike was introduced in 1948 at the World’s Fair and took the gold medal.”

The Chang Jiang came to Clive partially restored. “These motorcycles are assembled in China from a huge inventory of parts. The Chinese government had set up factories to just have people make things. In many cases they were way overproduced. Once they stopped producing parts, some independents started purchasing them and putting motorcycles together.”

The actual manufactured year of Chang Jiangs are a grey area. “Mine is registered as a 1968 motorcycle, but it could have been put together a few years ago from 1968 parts,” Clive explained. “The vast majority you will see are a compilation of parts put together by independent companies in China. The Chinese government has now put a stop to their export.”

The name Chang Jiang means long river and is named after the Yangtze River. “Most of them came with sidecars although some can be purchased without,” Clive said. “They have a reputation for being incredibly unreliable. However, I toured northern WA with my wife, fully loaded, and it never broke down. The key is preventative maintenance. You have to play with them. I spend two days checking everything and during the trip I check it again at least once a day.”

Then there’s Clive’s newest classic, the 1988 FZR250 Yamaha. “This was a Japanese market motorcycle with an EXUP (electronically controlled) exhaust. This one still has that in pristine condition. It redlines at 18,000 RPM. It’s a race bike for the street.”

JAWA PERAK

Year: 1953

Make: Jawa

Model: Perak 250

Mileage: 3,400 km since restoration

Motor: single cylinder with dual port

250 CC two stroke.

Restoration: Absolutely everything was restored, every nut and bolt.

Manufactured: 1948 to 1954 in Czechoslovakia

CHANG JIANG

Year: 1968

Make: Chang Jiang CJ750

Model: M1S

Mileage: 11,000 km – original mileage

Motor: Boxer 750 CC – 12 volt with overhead valves with reverse.

Looks like a BMW motor

Restoration:

Mostly cosmetic restoration including, seat, handle bar and controls, wheels carburetor, minor cosmetics/nuts/bolts restored. Side car somewhat restored on the interior and the windshield. All lighting upgraded to LED.

Manufactured: early 1960s in China, ceased assembling around 2018

YAMAHA

Year: 1988

Make: Yamaha

Model: FZR250

Mileage: 18,000 original km

Motor: 250 CC, 4 cylinder, 4 stroke

Restoration: Bike is basically all original

Manufactured: This exact model made only in 1988 in Japan

From West Shore Life + Style magazine

LifeLifestylemotorcycle

Get local stories you won't find anywhere else right to your inbox.
Sign up here

Just Posted

Salmon Arm councillor travels to Mexico over Christmas holiday

Politician says he regrets decision and didn’t consider the ramifications

Salmon Arm Recreation notified the public of a COVID-19 exposure at the Salmon Arm pool on Jan. 14. (Lachlan Labere/Salmon Arm Observer)
COVID-19 exposure reported at Salmon Arm pool

Salmon Arm Recreation became aware of the virus exposure on Jan. 13.

Askew’s Foods’ Claire Askew is concerned that due to budgetary constraints, pedestrian-friendly elements presented in early artist renderings of the Ross Street underpass may be sacrificed when the project is built due to budget constraints. (City of Salmon Arm image)
Salmon Arm businesses stress need for pedestrian-friendly Ross Street underpass

Concerns raised that walkability elements of underpass will be sacrificed due to budget constraints

A woman wearing a protective face mask to curb the spread of COVID-19 walks past a mural in Victoria, B.C., on Monday, Dec. 7, 2020. THE CANADIAN PRESS/Marissa Tiel
115 new COVID-19 cases, no new deaths in Interior Health

There are now a total of 4,970 cases in the region

The Sicamous Fire Department received funds totalling over $100,000 to investigate firehall upgrades or replacement. (File Photo)
Sicamous abandons fire boat plan, money shifted to fire hall upgrades

Dock owners will no longer have to pay a $125 fee which was funding fire boat reserve

Brett Forsythe battles it out in a game of singles pickleball on ice at Okanagan Training Rink Thursday, Jan. 7 in support of the Vernon Food Bank. (Jennifer Smith - Morning Star)
Pickleball play hits the ice in Okanagan

Rivals battle it out in support of the food bank

Kelowna RCMP precinct. (Michael Rodriguez - Capital News)
Kelowna Mountie transferred, fined after pointing gun at another officer

Const. Kristine Roesler argued she handled the gun safely and did it in the spirit of ‘dark humour’

Alan Davidson was sentenced to almost six years for abusing seven boys in the late 1970s and early 1990s. (Canadian Press file)
Full parole granted to former Mountie, sports coach convicted of sex abuse of boys

Alan Davidson convicted of abusing boys in B.C. and Saskatchewan in late ’70s, early ’90s

Carol Loiselle filed a discrimination and harassment complaint with the B.C. Humans Right Tribunal in 2018 after working at Windward Software Systems, Inc. in Penticton for eight years. (Google maps photo)
Penticton woman wins part of her B.C. Human Rights Tribunal case

Carol Loiselle alleges she faced years of discrimination, harassment at Windward Software Systems

The first COVID-19 vaccine arrives in B.C. in temperature-controlled containers, Dec. 13, 2020. (B.C. government)
More vaccine arrives as B.C. struggles with remote COVID-19 cases

Long-term care homes remain focus for public health

A Vernon resident shared a near-miss photo of a tree fallen onto her backyard shed in Vernon's East Hill, where it came to rest just above the roof of her home. (Kristine Erlendson photo)
Windstorm introduces large tree to Vernon family’s shed

The East Hill family home was nearly hit by the fallen fir tree Thursday morning

Several road closures were in effect Jan. 13 due to downed trees, but meanwhile many residents are hoping Lake Country will invest in fixing damaged roads in 2021. (District of Lake Country photo)
Lake Country trims tax increase back to 3.25 per cent

Proposed hike now down slightly from 3.49, discussions continue

The first Pfizer-BioNTech COVID-19 vaccine dose in Canada is prepared at The Michener Institute in Toronto on Monday, Dec. 14, 2020. THE CANADIAN PRESS/Frank Gunn
Doses of COVID-19 vaccine expected in 60 B.C. First Nations by next week

B.C. has allocated 25,000 doses of COVID-19 vaccine to First Nations for distribution by the end of February

Kamloops-South Thompson MLA Todd Stone questions the NDP government in the B.C. legislature, Feb. 25, 2020. (Hansard TV)
Todd Stone says he’s not running for B.C. Liberal leadership

Kamloops MLA was widely viewed as a front-runner

Most Read